Configuring A Call Forward Key Using The Mitel Web Ui; Blf/Xfer; Blf/Xfer Key Requirements And Functionality - Mitel 6920 User Manual

Mitel 6920 SIP Phone User Guide

Configuring a Call Forward Key Using the Mitel Web UI

1. Click on Operation > Softkeys and XML.
or
Click on Operation > Expansion Module <N>.
Softkeys
2. Select from Key 1 through Key 20 on the Top keys.
or
Select from Key 1 through Key 18 on the Bottom keys.
3. In the Type field, select Call Fwd.
4. In the state fields, check (enable) or uncheck (disable) the states you want to apply to this softkey.
Expansion Module Keys
5. Select from Key 1 through Key 84 (M695).
6. In the Type field, select Call Fwd.
7. Click Save Settings.

BLF/Xfer

Note: BLF/Xfer functionality can only be programmed on the left softkeys.
The BLF key allows one or more extensions to be monitored, and once there is any state change
with those extensions, the key shows the status of the monitored lines. The Transfer key allows a
call to be transferred to other recipients blindly or consultatively. The BLF/Xfer key combines the
BLF and Transfer keys' functionality together allowing the user to transfer calls or use BLF with one
key.
Note: It is recommended that you enable the Switch UI Focus to Ringing Line
parameter when using the BLF/Xfer feature. For more information about this parameter,
see "Switch UI Focus to Ringing Line"

BLF/Xfer Key Requirements and Functionality

• BLF/Xfer and BLF: A BLF/Xfer key can be configured for subscribing to an extension and monitor
the status of the extension, similar to the BLF key functionality. Changes of the state of the
monitored extension are indicated by the key's graphical button image as well as the key's LED.
lxxxviii
on page clxv.