Shared Call Appearance (Sca) Call Bridging - Mitel 6865i User Manual

ADDITIONAL FEATURES
In the Paging Listen Addresses text box, enter the multicast IP address(es) and port number on
2.
which the phone listens for incoming multicast RTP packets. Enter the IP address in dotted decimal
format.(for example, 239.0.1.15:10000,239.0.1.20:15000). You can enter up to 5 listening multicast
addresses. If this field is blank, the paging listening capability is disabled on the phone.
:
NOTE
Recipient of a paging call can set a global DND to ignore any incoming pages.
a.
For incoming paging, the phone uses the Intercom configuration settings. The incoming page is
b.
dependent on the Allow Barge In parameter setting and the idling/on call state.
Click Save Settings.
3.

Shared Call Appearance (SCA) Call Bridging

Shared Call Appearance (SCA) is when incoming calls are presented to multiple phones simultaneously.
For example, it is the ability to assign the boss' extension to a key on the secretary's phone. Calls can be
transferred between two phones with the same extension key by simply putting the call on hold at one
phone and picking it up on the other. Status LEDs light and flash in unison, allowing all people sharing the
extension to see the status at a glance.
The phones include an enhanced SCA for the servers that support call bridging and allows two or more
SCA users to be connected in a call with a third party. Refer to the following example:
Using the example above, when a call comes into Phone 1, Phone 2 and Phone 3 can pickup the same
call by pressing the SCA line key. Phone 2 and 3 display the call they are bridging into on the LCD of the
phones. Existing SCA parties in a bridge or one-to-one call hear an audible beep when another party has
joined the call.
: Your Administrator must enable/disable the beep on the server-side.
NOTE
S C A
HARED ALL PPEARANCE
(SCA) C B
ALL RIDGING
162