Filter Programmable Key - Mitel 6910 User Manual

ADDITIONAL FEATURES
: Contact your System Administrator for feature availability details and additional information on how
NOTE
to configure and use the BroadSoft BroadWorks Executive and Assistant Services feature.

FILTER PROGRAMMABLE KEY

A "Filter" programmable key type is available allowing both Executives and Assistants the ability to easily
activate and deactivate the Executive Call Filtering feature.
: Contact your System Administrator if you require assistance with regards to configuring the Filter
NOTE
key.
Filter Key for the Executive's Phone
The Executive's phone requires that only one Filter key be configured. The Filter key's value can either
be left undefined (which will toggle the Executive Call Filtering settings on the call manager via the SIP
SUBSCRIPTION/NOTIFY mechanism) or, it can be defined using the following values (which will toggle
the settings via an FAC call):
Executive Call Filtering Activation FAC (e.g. "#61")
•
Used when the Deactivation FAC is in the same format as the Activation FAC but sequentially one
•
number above the Activation FAC. For example, if the key value is defined as "#61" (the Activation
FAC), the phone will automatically assume that the Deactivation FAC is "#62" and will use that code
to deactivate Executive Call Filtering.
Executive Call Filtering Activation FAC followed by a semi-colon and then Executive Call Filtering
•
Deactivation FAC (e.g. "#61;*61" or "#61;#71")
Used when the Activation and Deactivation FACs are not in the same format or when they are not
•
sequential. For example, if the Activation FAC is configured in the BroadSoft BroadWorks Web portal
is "#61" and the Deactivation FAC is configured as "*61" or "#71", the key value should be defined with
the two specific FACs separated by a semi-colon (i.e. "#61;*61" or "#61;#71" respectively).
: If the Deactivation FAC is not specified after the semi-colon (e.g. "#61;"), the phone will
a.
NOTE
ignore the semi-colon and behave as if only the Activation FAC was defined (i.e. the phone will
automatically assume that the Deactivation FAC is in the same format but sequentially one
number above the Activation FAC.
The IP phones support Executive Call Filtering Activation/Deactivation FACs that contain the
b.
prefix "#" or "*".
Irrespective of a defined or undefined key value, when the Filter key is pressed, Executive Call Filtering
will be activated and the key's corresponding LED will be lit. When the Filter key is pressed again, Exec-
utive Call Filtering will deactivate and the key's corresponding LED will turn off.
: Upon a reboot, the initial state of the Filter key LED will correspond to the Executive Call Filtering
NOTE
state configured on the call manager.
Configuring the Filter Programmable Key on the Executive's Phone Using the Mitel Web UI
BROADSOFT BROADWORKS EXECUTIVE AND ASSISTANT SERVICES
151