Mitel 6910 User Manual page 169

ADDITIONAL FEATURES
IP Phone UI
Press the Options key, the
1.
menu
or
Press the Call Forward programmable key.
Press the navigation key three times to select Forward Filtering.
2.
Press the Change key to enter the Call Forward Mode Forward Filtering menu.
3.
Press the navigation key to highlight the Call Forward State menu.
4.
Press the Change key to enter the Call Forward State menu.
5.
Press the Next key to toggle the Call Forward State option from OFF to ON.
6.
Press the Set key.
7.
Press the navigation key to highlight the Call Forward Number menu.
8.
Press the Change key to enter the Call Forward Number menu and enter a forwarding number.
9.
Press the Set key.
10.
Press the Done key.
11.
Press the Confirm key to apply the changes. A checkmark will be displayed beside Fwd Filtering indi-
12.
cating call forwarding of all filtered calls is to be activated.
Press the Done key again.
13.
Press the Confirm key again.
14.
Press the Goodbye key to return to the idle screen. The idle screen will display a "CFWD Filtering"
15.
message and the Message Waiting Indicator (MWI) and (if configured) Call Forward key LEDs will be
lit indicating Forward Filtering is activated.
: Selecting the "All On" option is also applicable to Forward Filtering. For more information on
NOTE
the "All On" option, see
To Deactivate Call Forwarding of Filtered Calls
Use the following procedure to deactivate call forwarding of filtered calls:
BROADSOFT BROADWORKS EXECUTIVE AND ASSISTANT SERVICES
navigation key, and then the Enter key to enter the Call Forward
Using CFWD via the IP Phone UI
159