Customizing Your Phone; Ring Tones And Tone Sets; Ring Tones - Mitel 6910 User Manual

CUSTOMIZING YOUR PHONE

CUSTOMIZING YOUR PHONE
The following paragraphs describe the options available from either the IP phone UI, the Mitel Web UI, or
both, and provide procedures applicable to the option.

RING TONES AND TONE SETS

You can configure ring tones and ring tone sets on the IP phone.

RING TONES

There are several distinct ring tones a user can select to set on the IP phones. In addition to the 15
pre-installed ringtones, custom ring tones can be manually installed through the Web UI and selected for
use (if enabled by your Administrator). You can enable/disable these ring tones on a global or per-line
basis.
There are 10 additional ringtones are available (Velocity, Skyline, Rise, Daybreak, After Hours, Open
Road, Pronto, Voyage, Bloom, Move).
: Individual contact ring tones are also supported on the 6910. Individual contact ring tones can be
NOTE
used during incoming calls to help users identify the party calling. For more information on individual
contact ring tones, see
The following table identifies the valid settings and default values for each type of configuration method:
Ring Tones
CONFIGURATION METHOD
IP Phone UI
"Local Directory Features".
VALID VALUES
Global
Velocity
Skyline
Rise
Daybreak
After Hours
Open Road
Pronto
Voyage
Bloom
Move
Tone 1 to 15
Silent
Custom Ring Tone 1 to 8
(if available)
RING TONES AND TONE SETS
DEFAULT VALUE
Global Setting:
Tone 1
25