Configuring Xml Beep Support; Status Scroll Delay - Mitel 6910 User Manual

ADDITIONAL FEATURES

CONFIGURING XML BEEP SUPPORT

MITEL WEB UI
Click on Basic Settings > Preferences > General.
1.
XML Beep Support is enabled by default. If required, disable the XML Beep Support field by
2.
unchecking the check box.
Click Save Settings.
3.

STATUS SCROLL DELAY

Using the Mitel Web UI, you can specify a scroll delay option that allows you to set the time delay, in
seconds, between the scrolling of each status message on the phone. You can specify this setting in the
Status Scroll Delay (seconds) field at the path Basic Settings > Preferences > General. The default time
is 5 seconds for each message to display before scrolling to the next message. You can increase or
decrease this time as required. Setting and saving the value in the Mitel Web UI applies to the phone
immediately.
STATUS SCROLL DELAY
137