Configuring Message Waiting Indicator; Incoming Intercom Call Features - Mitel 6905 User Manual

A F
DDITIONAL EATURES
You configure the MWI using the Mitel Web UI.

Configuring Message Waiting Indicator

Click on Basic Settings > Preferences > General.
1.
The Message Waiting Indicator Line field is set to all lines by default. If required, change the setting
2.
to a specific line by selecting a line from the list. Valid value sAll and lines 1 and2.
Click Save Settings.
3.

Incoming Intercom Call Features

By default, the IP phone allows incoming intercom calls to be automatically answered without having to
set up an Icom key on your phone. The phone automatically plays a warning tone when it receives an
incoming intercom call. It also mutes the microphone. If the intercom call comes into the phone while an
active call is already present, the phone puts the active call on hold and answers the intercom call.
You can change the behavior of how the phone handles incoming intercom calls by enabling/disabling
specific parameters using the Mitel Web UI.
Auto Answer
•
Microphone Mute
•
Play Warning Tone
•
Allow Barge In
•
I I C
NCOMING NTERCOM ALL
F
EATURES
132