Mitel 6905 User Manual page 60

L K P
INE EY AND ROGRAMMABLE
You can only use the Mitel Web UI to configure key functions. The following table lists the functions you
can set on the programmable keys and provides a description for each function:
KEY FUNCTION
None
Speeddial
Do Not Disturb
XML
Flash
Sprecode
Park
Pickup
Last Call Return
Call Fwd
Speeddial/Xfer
Speeddial/Conf
Directory (Key 2 by Default)
K
EYS
DESCRIPTION
Indicates the key has no function assigned.
Indicates the key is configured for speeddial use.
Indicates the key is configured for Do Not Disturb
(DND) functionality.
Indicates the key is configured to accept an XML
application for accessing customized XML
services.
Indicates the key is set to generate a flash event
when it is pressed. The IP phone generates flash
events only when a call is connected and there is
an active RTP stream (for example, when the call
is not on hold).
Indicates the key is configured to automatically
activate specific services offeredby the server.
For example, if the sprecode value of *82 is
configured, then by pressing the Sprecode key,
*82 automatically activates a service provided by
the call manager.
Indicates the key is configured to park incoming
calls when pressed.
Indicates the key is configured to pick up parked
calls when pressed.
Indicates the key is configured for Last Call
Return functionality when pressed.
Indicates the key is configured as a Call Forward
key. When pressed, the IP phone UI displays the
Call Forward menus.
Indicates the key is configured as a simplified
speed dial key and a transfer key.You can use
this key to perform speed dial functions as well as
use it as a transfer key to transfer calls.
Indicates the key is configured as a speed dial
key and a conference key. You can use this key
to speed dial from within a conference call and
add the new call directly to the conference.
Indicates the key is configured to access the
Directory.
P K
ROGRAMMABLE EYS
50