Table of Contents
Advertisement
SmartLi 3.0
User Manual (Long-Term Backup Power)
●
●
●
●
4.2 Battery Module Transportation Requirements
Load or unload batteries with caution. Otherwise, the batteries may be short-
circuited or damaged (such as leakage and crack), catch fire, or explode.
Batteries must be transported separately. Do not transport a cabinet with batteries
installed. If the cabinet needs to be transported or moved, remove the batteries
first.
Do not move a battery by holding its terminals, bolts, or cables. Otherwise, the
battery may be damaged.
Issue 09 (2024-01-31)
When moving a heavy object, be aware of the workbench, slope, staircase,
and slippery places. When moving a heavy object through a door, ensure that
the door is wide enough to move the object and avoid bumping or injury.
When transferring a heavy object, move your feet instead of twisting your
waist. When lifting and transferring a heavy object, ensure that your feet
point to the target direction of movement.
When transporting the equipment using a forklift truck, ensure that the forks
are properly positioned so that the equipment does not topple. Before moving
the equipment, secure it to the forklift truck using ropes. When moving the
equipment, assign dedicated personnel to take care of it.
When transporting a cabinet, ensure that its tilt angle meets the requirements
shown in the figure. The tilt angle α of a cabinet with packaging shall be less
than or equal to 15°. After the cabinet is unpacked, its tilt angle α shall be
less than or equal to 10°.
D ANGER
WARNING
WARNING
Copyright © Huawei Digital Power Technologies Co., Ltd.
4 Transportation and Storage Requirements
43
Advertisement
Table of Contents
