Installing A Ground Cable - Huawei SmartLi 3.0 User Manual

SmartLi 3.0
User Manual (Long-Term Backup Power)
Step 4 Connect the cable with a crimped terminal to the corresponding copper bar.
Step 5 Bind the cable to the nearby beam.
Step 6 Clear sundries inside the cabinet.
----End

5.6.2 Installing a Ground Cable

Procedure
Step 1 Remove the cover from the PDU. Remove the ground cable gland nut and sealing
plugs.
Figure 5-13 Removing the cover
Step 2 Install a ground cable.
1.
2.
3.
Issue 09 (2024-01-31)
NO TE
Select an appropriate cabling route based on the actual situation. The figure is for reference
only.
Remove certain gland sealing plugs based on the actual cable specifications.
Route the cable through the gland nut and sealing plugs.
Cut the cable and crimp the cable terminal.
Connect the cable to the copper bar.
Copyright © Huawei Digital Power Technologies Co., Ltd.
5 Installation and Cable Connection
68