Table of Contents
Advertisement
SmartLi 3.0
User Manual (Long-Term Backup Power)
Figure 5-8 Drilling a hole and installing an expansion sleeve
(1) M12 bolt
(4) Expansion sleeve
Step 3 Wheel the cabinet to the installation position.
Step 4 If the castors need to hang in the air, perform
Installation.
Step 5 Secure the cabinet.
1.
2.
Figure 5-9 Tightening expansion bolts
----End
Non-Secured Installation
Step 1 Adjust the four anchor bolts at the bottom of the cabinet until all the four castors
at the bottom hang in the air and the anchor bolts bear all of the cabinet weight.
Issue 09 (2024-01-31)
Remove the four plugs from the bottom of the cabinet.
Insert expansion bolts into the expansion bolt holes in the floor, and tighten
the expansion bolts.
Copyright © Huawei Digital Power Technologies Co., Ltd.
(2) Spring washer
(5) Expansion nut
1
and
5 Installation and Cable Connection
(3) Flat washer
(6) Concrete floor
2
in
Non-Secured
65
Advertisement
Table of Contents
