03/ Control Panel - ACME TORNADO User Manual

1. Display
2. Buttons
3. RELEASE VALVE
4. POWER IN
5. POWER OUT
6. ETHERNET
7. DMX OUT
8. DMX IN
9. FIRMWARE
UPGRADE

03/ Control Panel

To show the various menus and the selected function
MENU To enter into move backward or leave the menu
 UP To go backward to move up in the menu
 DOWN To go forward to move down in the menu
ENTER To perform the desired functions
To connect to supply power
To connect to the next fixture
Transfers fixture's information to a main controller
For DMX512 link, use 5-pin XLR cable to link the next units to
output DMX signal (3-pin XLR cable is optional)
For DMX512 link, use 5-pin XLR cable to link the unit and DMX
controller to input DMX signal (3-pin XLR cable is optional)
Used to upgrade fixture's firmware
- 8 -