1. Manuals
  2. Brands
  3. ACME Manuals
  4. Lighting Equipment
  5. Thunderbreaker
  6. User manual

ACME Thunderbreaker User Manual

Hide thumbs
Table of Contents

Advertisement

Quick Links

Download this manual

Advertisement

Table of Contents
loading

Related Manuals for ACME Thunderbreaker

Summary of Contents for ACME Thunderbreaker

  • Page 2: Table Of Contents

    CONTENTS 1. Safety Instructions ....................2 2. Technical Specifications ..................4 3. In Stallation and Splicing..................6 4. Description......................8 4.1 Control Ption .....................8 5. How To Set The Unit....................9 5.1 Main Function....................9 6. Control By Universal DMX Controller ..............18 6.1 DMX512 Connection ..................18 6.2 Address Setting ....................1 9 6.3 DMX512 Configuration..................2 0 7.

  • Page 3: Safety Instructions

    1. Safety Instructions Please read the instruction carefully which includes important information about the installation, usage and maintenance. WARNING Please keep this User Guide for future consultation. If you sell the unit to another user, be sure that they also receive this instruction manual. Important: Damages caused by the disregard of this user manual are not subject to warranty.
  • Page 4 In the event of serious operating problem, stop using the unit immediately.  Never turn on and off the unit time after time.  The housing, the lenses, or the ultraviolet filter must be replaced if they are visibly damaged. ...

  • Page 5: Technical Specifications

    2. Technical Specifications Power Voltage: AC 100~240V, 50/60Hz Power Consumption: 395w Light Source: 576 x 0.8W RGBW LED Beam Angle: 110° Dimmer/Shutter: Smooth dimming from 0-100%; outstanding strobe effect with variable speed Control: 6+/11+/12+/13A+/13B+/17+/21A+/21B+/29+/37+/41+/53+ Channels DMX Channel: Protocols: DMX512, RDM Firmware Upgrade via DMX link or USB disk Construction: Display: Color display...
  • Page 6  Dimension/Weight: 503 x 183 x 318mm, 10.5kgs 19.8" x 7.2" x 12.5"in, 23.1lbs...

  • Page 7: Installation And Splicing

    3.Installation and splicing The lamp should be fixed on the bracket with screws. Make sure that the installation is firm to prevent vibration and slipping during operation. Also make sure that the brackets for the fixtures are stable and can support more than 10 times the weight of the equipment. At the same time, when installing the equipment, use a safety rope that can support 12 times the weight of the product.
  • Page 8 Installation method of lamp hanger (optional): ： The splicing method of multiple lamps： Warning: Up to 7 units can be spliced in the vertical direction...

  • Page 9: Description

    4.Description 4.1Control Panel 1. DISPLAY: To show the various menus and the selected function 2. POWER IN(POWERCON Version): To connect to supply power 3. POWER OUT(POWERCON Version): To connect to the next fixture 4. Button: MENU To enter into move backward or leave the menu To go backward to move up in the menu DOWN To go forward to move down in the menu...

  • Page 10: How To Set The Unit

    5. How To Set The Unit 5.1 Main Function Turn on the unit, press the MENU button into menu mode, and press the UP/DOWN button until the required function is shown on the monitor. Select the function by the ENTER button. Use the UP/DOWN button to choose the submenu, press the ENTER button to store and automatically return to the last menu.
  • Page 11 DMX Address 1-512 6+Channel 11+Channel 12+Channel 13A+Channel 13B+Channel DMX Channel Mode DMX Settings 17+Channel 21A+Channel 21B+Channel 29+Channel 37+Channel 41+Channel 53+Channel BlackOut Hold No DMX Status Manual X X XX . X X X . XX X . XX X IP Adaresl The internet Submask XX XX .
  • Page 12 DMX Settings Select the MENU mode, select DMX Settings, press ENTER button to confirm, use UP/DOWN buttons to select: DMX Address, Channel Mode, DMX Last State, Network or Pixel settings. DMX Address Select the DMX Address, press the ENTER button to confirm, the current DMX Address will be shown on the display.
  • Page 13 the last received DMX signal. Manual: When the DMX signal is disconnected, the device runs in manual mode. The internet Select the The internet and press the ENTER button to confirm. The current mode will be displayed on the display. Use the UP/DOWN buttons to select: IP address or submask code.
  • Page 14 Dimming curve Select the Dimming Curve and press the ENTER button to confirm. Use the UP/DOWN button to select linear, square rate, inverse square rate or S curve. After selecting the desired mode, press the ENTER button to set and save. Press the MENU button to return, or wait one minute to return to the main menu.
  • Page 15 White Balance: Select White Balance, press the ENTER button to confirm, the current mode will be displayed on the display, and use the UP/DOWN buttons to select: Red, Green, Blue, White and press the ENTER button to save. Press the MENU button to return to the previous menu or wait one minute to automatically exit the menu mode.
  • Page 16 Automatic Testing Select Automatic Testing , press ENTER button to confirm, the machine will automatically run the built-in program test. Press the MENU button to return to the previous menu or return to the menu mode after the test. Manual Mode Select the Manual Mode and press enter to confirm.
  • Page 17 LED Total Hours, press the ENTER button to confirm, the total number of LED hours will be displayed on the screen, press the MENU button to exit. Select the LED ON Time, press the ENTER button to confirm, the LED on time will be displayed on the screen, press the MENU button to exit.
  • Page 18 Special Function Enter MENU mode, select Special Function, press ENTER button to confirm, select: Restore Factory Settings Restore factory settings Select Restore Factory Settings, press the ENTER button to confirm, use the UP/DOWN buttons to select: No (keep the current settings) or Yes (restore the factory settings), once selected, press the ENTER button to save.
  • Page 19 5.2Home Position Adjustment Press the MENU button into menu mode, then press the ENTER button for about 3 seconds into offset mode to adjust the home position. Select the function by the ENTER button. Use the UP/DOWN button to choose the submenu, press the ENTER button to store and automatically return to the last menu. Press MENU button to exit.

  • Page 20: Control By Universal Dmx Controller

    6. Control By Universal DMX Controller 6.1 DMX512 Connection DMX OUT DMX IN 1. At last unit, the DMX cable has to be terminated with a terminator. Solder a 120-ohm 1/4W resistor between pin 2(DMX-) and pin 3(DMX+) into a 3-pin XLR-plug and plug it in the DMX-output of the last unit.

  • Page 21: Address Setting

    3 pin XLR: Pin 1: GND, Pin 2: Negative signal (-), Pin 3: Positive signal (+) 5 pin XLR: Pin 1: GND, Pin 2: Negative signal (-), Pin 3: Positive signal (+), Pin4, Pin5 not used. 6.2 Address Setting Press the MENU button to enter the menu mode, select the DMX setting, use the UP/DOWN button to select the DMX address, press the ENTER button to confirm, the current address will be displayed on the display, and then use the UP/DOWN button to select the address code (1-512 ), press the ENTER button to save.

  • Page 22: Dmx512 Configuration

    53+ Channels 6.3 DMX512 Configuration Please refer to below configurations to control the fixtures Attentions: 1. The unit will maintain the last condition until reset if you cut-off the DMX signal. 2. For the channel Function, keep the value for about Five seconds, then the corresponding function will take into effect.
  • Page 23 DMX Channel 6+Channel Channel Function Green Blue White Brightness Fine-tuning Art-Net or DMX 0-127 machine controlled by Art-Net 128-255 machine controlled by DMX 11+Channel Channel Function Red Fine-tuning Green Green Fine-tuning Blue Fine-tuning Blue White Fi n e- t uni ng White Brightness Brightness Fine-tuning...
  • Page 35 17+channel 13A+channel 13B+Channel 21B+channel 29+channel 21A+channel 53+channel 41+channel 37+channel...
  • Page 50 Error Message 1. LED Fan Error Check if the fan is not running. Check if the fan leads are installed in place or disconnected. Check if the fan is damaged. Check if there are other interference items in the fan operating range. Check if the fan circuit on the motherboard breaks down.

  • Page 51: Troubleshooting

    7. Troubleshooting Following are a few common problems that may occur during operation. Here are some suggestions for easy troubleshooting: A. The unit does not work, no light and the fan does not work 1. Check the connect power 2. Measure the mains voltage on the main connector. 3.
  • Page 52 Innovation, Quality, Performance...

Table of Contents