ACME TORNADO User Manual page 22

Fixture Test
Enter the control menu and select Fixture Test, press ENTER. Use the UP/DOWN button to
select Auto Test or Manual Test.
Auto Test
Manual Test
Fixture Information
Enter the control menu and select Fixture Information, press ENTER. Use the UP/DOWN
button to select Fixture Use Hour, LED Use Hour, Humidity, Temperature, Fan State, Firmware
Version, RDM UID or Error Logs.
Fixture Use Hour
Select Auto Test, press ENTER.
Use UP/DOWN button to select Single (the device immediately performs
a single automatic self-test) or Cycle (the device immediately performs a
cyclic automatic self-test), confirm your selection with ENTER.
To exit the menu, press MENU.
Select Manual Test, press ENTER.
Use UP/DOWN button to select the channel for which the manual test
is to be performed, confirm your selection with ENTER.
Use UP/DOWN button to select a value, confirm your selection with
ENTER.
To exit the menu, press MENU.
(The device returns to its original DMX state after the manual test. The
test values are saved automatically when the device is switched off.)
Select Fixture Use Hour, press ENTER.
The operating hours is displayed.
To exit the menu, press MENU, or wait 30 seconds.
- 21 -