Ipso Version Requirement; Connectors And Cables - Nokia IP500 Series Installation Manual

5
Interface Card Reference Information

IPSO Version Requirement

To use a dual-port Gigabit Ethernet NIC with your appliance, you must run
IPSO v3.5 or later.

Connectors and Cables

To connect the card to other network components, use a multimode,
fiber-optic cable with an LC connector for each card interface. The
destination end of the cable can be either LC or SC, depending on the type of
connector required for the destination Gigabit Ethernet device. You can also
use an LC-to-LC cable for loopback purposes.
An LC-to-SC cable is included with single-port Gigabit Ethernet NICs, and
two LC-to-SC cables are included with dual-port Gigabit Ethernet NICs. You
can order additional cables from a cable vendor of your choice.
62
All manuals and user guides at all-guides.com
IP500 Series Installation Guide