Problems Exchanging Routes; Problems With Memory Upgrade Or Replacement - Nokia IP500 Series Installation Manual

Problem The number of networks exceeds the limit for RIP, which is 16
networks.
Solution Verify that your network topology does not exceed this limit.

Problems Exchanging Routes

Troubleshooting Tip Always enter a metric value if you are exporting
routes from OSPF to RIP.
Problem Exchanging routes is not configured correctly.
Solution Exchanging routes involves several configuration steps. Follow
the tasks in the Voyager Reference Guide (click Doc) to ensure that all steps
are followed.

Problems with Memory Upgrade or Replacement

The appliance is not receiving power
Problem The power cord is not properly plugged in.
Solution Check the power source. If there is no power at the source, take
appropriate action such as inserting a new fuse or resetting the circuit breaker.
Problem The power supply is not providing power.
Solution Check the power source. If there is no power at the source, take
appropriate action such as inserting a new fuse or resetting the circuit breaker.
IP500 Series Installation Guide
All manuals and user guides at all-guides.com
Routing Problems
123