Nokia IP500 Series Installation Manual page 100

6
Installing and Replacing Other Components
6. Click Apply to enable the card.
To enable the accelerator card for a Check Point VPN
1. Start Nokia Network Voyager for your appliance.
2. On the Voyager home page, click Config.
3. Scroll down to Security and Access Configuration and click
Cryptographic Hardware Acceleration.
4. At Hardware Device Configuration, click On.
5. Click Apply to enable the card.
You can also monitor Nokia encryption accelerator card interfaces with
Voyager. For more information about accessing Voyager and locating relevant
reference materials, see the Voyager Reference Guide.
100
All manuals and user guides at all-guides.com
IP500 Series Installation Guide