Installing Ipso Using The Boot Manager - Nokia IP100 Series Installation Manual

Installing IPSO Using the Boot Manager

IP100 Series Installation Guide
The form of the install command is:
install
Refer to the appropriate version of release notes for
NOTE:
complete installation procedures.
A full installation using the install command deletes the
NOTE:
existing database on the unit.
To install a new copy of the operating system (IPSO) kernel using the
boot manager, perform the following steps.
1.
At the boot manager command prompt, enter the following:
BOOTMGR[0]>install
If you have used the passwd command to protect this procedure, the
boot manager asks you for your password before allowing you to
execute the install command.
2.
Enter the information the install command requests (your
system's IP address, the server's IP address, and other information).
3.
Reboot the NAP.
Installing IPSO Using the Boot Manager
55