Problems Exchanging Routes - Nokia IP100 Series Installation Manual

Problems Exchanging Routes

IP100 Series Installation Guide
Possible Solution
RIP version 1 must use consistent subnet masks. If you need to use
inconsistent subnet masks, change to RIP version 2 or OSPF.
Possible Cause
The number of networks exceeds the limit for RIP, which is 16
networks.
Possible Solution
Verify that your network topology does not exceed this limit.
Troubleshooting Tips
Always enter a metric value if you are exporting routes from OSPF to
RIP.
Possible Cause
Exchanging routes is not configured correctly.
Possible Solution
Exchanging routes involves several configuration steps. Follow the
tasks in the Voyager Reference Guide (click
steps are followed.
Routing Problems
) to ensure that all
D
OC
81