Description Of Connection Procedure - Eizo CuratOR LL550W Instructions For Use Manual

5.3 Description of connection procedure

CAUTION
Opening the connection panel cover
• Only service may open the connection panel cover.
• The screw torque may not exceed 0.75 Nm +/- 0.05 Nm.
• Patients must not be present when the cover is open.
CAUTION
Connector
Connectors may only be plugged in or removed by Service when the device is switched
off.
Prerequisite
The monitor must be installed correctly.
Connecting
1. Loosen the connection panel Combi-Torx screws.
2. Remove the connection panel cover.
3. Connect the appliance plug to the monitor power socket.
4. Secure appliance cable with cable ties to the lug to prevent unintentional loosening
(marked with a circle).
5. Insert the DVI cable directly into the DVI socket. Only Dual Link DVI cables of a corre-
spondingly high quality may be used.
CuratOR LL550W
Instructions for Use, 02/2024
5.3 Description of connection procedure
Connecting
21