Table of Contents
Advertisement
To reinstall the head restraint, put the head restraint
posts into the holes and push downward. Then, adjust it
to the appropriate height using the adjustment button.
For information on child seat tether routing, see
page 200.
NOTE:
Lower the center head restraint to avoid contact with
the center console when folding the seat down.
WARNING!
•
Do not drive the vehicle without the rear seat head
restraints installed while passengers are occupying
the rear seat. In a collision, people riding in this
area without the head restraints installed are more
likely to be seriously injured or killed.
•
A loose head restraint thrown forward in a collision
or hard stop could cause serious injury or death to
occupants of the vehicle. Always securely stow
removed head restraints in a location outside the
occupant compartment.
•
ALL the head restraints MUST be reinstalled in the
vehicle to properly protect the occupants. Follow
the preceding reinstallation instructions prior to
operating the vehicle or occupying a seat.
UCONNECT VOICE RECOGNITION
INTRODUCING VOICE
RECOGNITION
Start using Uconnect Voice Recognition with these help-
ful quick tips. It provides the key Voice Commands and
tips you need to know to control your vehicle's Voice
Recognition (VR) system.
BASIC VOICE COMMANDS
The following basic Voice Commands can be given at
any point while using your Uconnect system.
Push the VR button
. After the beep, say:
•
"Cancel" to stop a current voice session.
•
"Help" to hear a list of suggested Voice Commands.
•
"Repeat" to listen to the system prompts again.
Notice the visual cues that inform you of your Voice
Recognition system's status.
GET STARTED
The
VR button is used to activate/deactivate your
Voice Recognition system.
Helpful hints for using Voice Recognition:
•
Reduce background noise. Wind noise and passen-
ger conversations are examples of noise that may
impact recognition.
•
Speak clearly at a normal pace and volume while
facing straight ahead.
•
Each time you give a Voice Command, first push the
VR button, wait until after the beep, then say your
Voice Command.
GETTING TO KNOW YOUR VEHICLE
•
You can interrupt the help message or system
prompts by pushing the VR button and saying a
Voice Command from the current category.
Uconnect Voice Command Buttons
1 — Push To Start Or Answer A Phone Call And Send Or
Receive A Text
2 — Push The Voice Recognition Button To Begin Radio,
Media, Navigation, And Climate Functions
3 — Push The Hang-up Button To End A Call
ADDITIONAL INFORMATION
© 2023 FCA US LLC. All rights reserved. Mopar and
Uconnect are registered trademarks and Mopar Owner
Connect is a trademark of FCA US LLC. Brand Connect
and all related marks and logos are trademarks of
Brand Connect Radio Inc.
page 302.
For Uconnect system support, call 1-877-855-8400
(24 hours a day 7 days a week) or visit
DriveUconnect.com (US) or DriveUconnect.ca (Canada).
43
2
Advertisement
Table of Contents
