Jeep Gladiator 2024 Owner's Manual page 64

62 GETTING TO KNOW YOUR VEHICLE
Jeep® Wireless Speaker Location
Wireless Speaker Location
The Jeep® wireless speaker is located behind the right
rear passenger seat. In order to access the Jeep® wire-
less speaker, the seat will need to be folded down or
tilted forward.
To remove the Jeep® wireless speaker, pull on the
strap located on top of the mount for the speaker.
When the strap is pulled, the Jeep® wireless speaker
can easily be lifted from the mount.
When placing the Jeep® wireless speaker back in the
mount, simply put the speaker back in the mount.
Placement of the Wireless Speaker
Then push/rotate forward on the front of the speaker
until the speaker locks in place.
Rotating the Wireless Speaker
Charging External Devices
The Jeep® wireless speaker is capable of charging
most USB-enabled smartphones and tablets using the
type A USB charging port.
To use the external charging feature:
1. Turn the speaker on.
2. Plug the USB power cable into the type A USB charg-
ing port on the back of the speaker.
3. Insert the other end of the USB power cable into
your device to immediately begin charging.
Charging The Speaker
Before using the Jeep® wireless speaker for the first
time, fully charge your Jeep® wireless speaker until the
battery indicator light stays solid green.
The Jeep® wireless speaker in-vehicle dock is the most
ideal way to fully charge the speaker with the ignition in
ON/RUN or ACC. The speaker can also be charged with
a power adapter.
NOTE:
Jeep® wireless speaker will not charge within vehicle
dock while the ignition is fully off.
To charge the Jeep® wireless speaker with a power
adapter, insert the power adapter into a wall outlet.
Next, plug the power adapter into the Jeep® wireless
speaker charging port on the back of the speaker.
NOTE:
Power adapter needed for the Jeep® wireless speaker
has to have a range of 14 VDC to 16.5 VDC, with a mini-
mum of 2.7A and a barrel connector dimension of
5.5 mm by 2.5 mm. Power adapter is not included.
Monitoring Battery Level Status LED Light
Red
40% or lower
Yellow
40% to 70%
Green
70% to 100%