Carpet Removal - Jeep Gladiator 2024 Owner's Manual

290 SERVICING AND MAINTENANCE
WARNING!
•
ONLY install carpet designed to fit your vehicle.
NEVER install carpet that cannot be properly
attached and secured to your vehicle. If the carpet
needs to be replaced, only use manufacturer
approved carpet for the specific make, model, and
year of your vehicle.
•
If the vehicle carpet has been removed and
re-installed, always properly attach carpet to the
floor and check that the floor mat fasteners are
secure to the vehicle carpet. Fully depress each
pedal to check for interference with the accelerator,
brake, or clutch pedals then re-install the floor mats.

CARPET REMOVAL

Front Carpets:
1. Remove the front grommets.
Front Carpet
1 — Grommets
2. Pull the carpet out from the front to the rear.
Front Carpet Pulled Away
3. Remove the grommets under the front seat. First for
the rear carpet and then the front carpet.
Front And Rear Carpet Split
4. Under the back of the front seat, open the carpet
split and then pull out the rear edge and slide the
carpet to the front (do not remove the harness).
Rear Underside Of Front Seat Carpet Split
5. Finally open the carpet split around seat bracket
and then remove the last two grommets.
6. When reinstalling carpet, perform these steps in
reverse order, making sure that the carpet is tucked
under the scuffs, B-pillar, and console, and then
refasten the grommets.