Table of Contents
Advertisement
40
GETTING TO KNOW YOUR VEHICLE
Rear Seat Folded Flat
NOTE:
Each rear seatback can be locked in an upright position
using the vehicle key. Each seatback must be unlocked
to release for folding.
Locking The Seatback
To raise the seatback to the proper position, manually
lift the seatback until it locks into place. To return the
head restraint to the proper position, manually lift up
until it locks into place. If interference from the cargo
area behind the seat prevents the seatback from fully
locking, you will have difficulty returning the seats to
their proper position.
NOTE:
•
The vehicle is equipped with stow clips located on
the lower trim, next to the rear seats. Use these
clips to hold the seat belt out of the path of the
seatback when it is being folded and raised.
Stow Clip Location
•
You may experience deformation in the seat cushion
from the seat belt buckles if the seats are left folded
for an extended period of time. This is normal. By
simply unfolding the seats to the open position, the
seat cushion will return to its normal shape over
time.
WARNING!
Be certain that the seatback is securely locked into
position. Perform a "push - pull - push" check to con-
firm the seat is fully locked. If the seatback is not
securely locked into position, the seat will not provide
the proper stability for child seats and/or passengers.
A red indicator on the pull strap will be displayed if
the seatback is not securely locked. An improperly
latched seat could cause serious injury.
REAR SEAT STADIUM POSITION
The rear seat bottoms can be folded upward into the
Stadium Position to create more storage space on the
vehicle's floor, and to access the under seat storage
bins (if equipped).
To fold the seat bottom upward, proceed as follows:
1. Lift upward on each section of the seat bottom.
Lift From Beneath Seat (Left Side Shown)
Advertisement
Table of Contents
