Igmp Router Setting - Planet IGS-4215-8UP4X User Manual

4.8.5 IGMP Router Setting

Depending on your network connections, IGMP snooping may not always be able to locate the IGMP querier. Therefore, if the
IGMP querier is a known multicast router/ switch connected over the network to an interface (port or trunk) on your Industrial
Managed Switch, you can manually configure the interface (and a specified VLAN) to join all the current multicast groups
supported by the attached router. This can ensure that multicast traffic is passed to all the appropriate interfaces within the
Industrial Managed Switch.
The IGMP Router Setting and Status screens in
The page includes the following fields:
Object

VLAN ID
 Type
 Static Ports Select
 Forbid Port Select
Buttons
: Click to add IGMP router port entry.
The page includes the following fields:
Object

VLAN ID
 Static Ports
 Forbidden Ports
 Modify
Figure 4-8-13 and
Figure 4-8-13: Add Router Port Page Screenshot
Description
Selects the VLAN to propagate all multicast traffic coming from the attached
multicast router.
Sets the Router port type. The types of Router port as below:

Static

Forbid
Specify which ports act as router ports. A router port is a port on the Ethernet
switch that leads towards the Layer 3 multicast device or IGMP querier.
Specify which ports un-act as router ports.
Figure 4-8-14: Router Port Status Page Screenshot
Description
Displays the current VLAN ID.
Displays the current static ports.
Displays the current forbidden ports.
Click to edit parameter.
Click to delete the group ID entry.
193
User's Manual of IGS-4215-8T4X_IGS-4215-8UP4X
Figure 4-8-14 appear.