Planet IGS-4215-8UP4X User Manual page 31

 Reset Button
On the left of the front panel, the reset button is designed to reboot the Industrial Managed Switch without turning off and
on the power. The following is the summary table of reset button functions:
Reset Button
Press the reset button for < 5 seconds
for system reboot.
Press the reset button for > 5 seconds
for factory default.
User's Manual of IGS-4215-8T4X_IGS-4215-8UP4X
Reset button
Function
Reboot the Industrial Managed Switch.
Reset the Industrial Managed Switch to Factory Default
configuration. The Industrial Managed Switch will then reboot
and load the default settings shown below:
Default username: admin
。
Default password: admin
。
Default IP address: 192.168.0.100
。
Subnet mask: 255.255.255.0
。
Default gateway: 192.168.0.254
。
31