Flow Control
Buttons
: Click to apply changes.
The page includes the following fields:
Object
LAG
Description
Port Type
Enable State
Speed
Duplex
Flow Control Config
Flow Control Status
User's Manual of IGS-4215-8T4X_IGS-4215-8UP4X
When Auto Speed is selected for a port, this section indicates the flow control
capability that is advertised to the link partner. When a fixed-speed setting is
selected, that is what is used. The current Rx column indicates whether pause
frames on the port are obeyed. The current Tx column indicates whether pause
frames on the port are transmitted. The Rx and Tx settings are determined by the
result of the last Auto-Negotiation. Check the configured column to use flow
control. This setting is related to the setting for Configured Link Speed.
Figure 4-4-7: LAG Port Status Page Screenshot
Description
The LAG for the settings contained in the same row.
Displays the current description.
Displays the current port type.
Displays the current enable state.
Displays the current speed.
Displays the current duplex mode.
Displays the current flow control configuration.
Displays the current flow control status.
127