Duplex
Flow Control
Buttons
: Click to apply changes.
The page includes the following fields:
Object
Port
Description
Enable State
Link Status
Speed
Duplex
Flow Control Configuration
Flow Control Status
User's Manual of IGS-4215-8T4X_IGS-4215-8UP4X
1000M – Set up 1000M Force mode.
2.5G – Set up 2.5G Force mode.
10G – Set up 10G Force mode.
Select any available link duplex for the given switch port. Draw the menu bar to
select the mode.
Auto – Set up Auto negotiation.
Full - Force sets Full-Duplex mode.
Half - Force sets Half-Duplex mode.
When Auto Speed is selected for a port, this section indicates the flow control
capability that is advertised to the link partner. When a fixed-speed setting is
selected, that is what is used. Current Rx column indicates whether pause
frames on the port are obeyed. Current Tx column indicates whether pause
frames on the port are transmitted. The Rx and Tx settings are determined by the
result of the last Auto-Negotiation. Check the configured column to use flow
control. This setting is related to the setting for Configured Link Speed.
Figure 4-3-2: Port Status Page Screenshot
Description
This is the logical port number for this row.
Click
to indicate the port name.
Display the current port state.
Display the current link status.
Display the current speed status of the port.
Display the current duplex status of the port.
Display the current flow control configuration of the port.
Display the current flow control status of the port.
105