Planet IGS-4215-8UP4X User Manual page 108

Object
 Alignment Errors
 FCS Errors
 Single Collision
Frames
 Multiple Collision
Frames
 Deferred
Transmissions
 Late Collision
 Excessive Collision
 Frame Too Long
 Symbol Errors
 Control In Unknown
Opcodes
 In Pause Frames
 Out Pause Frames
User's Manual of IGS-4215-8T4X_IGS-4215-8UP4X
Description
The number of alignment errors (mis-synchronized data packets).
A count of frames received on a particular interface that are an integral number of
octets in length but do not pass the FCS check. This count does not include
frames received with frame-too-long or frame-too-short error.
The number of successfully transmitted frames for which transmission is inhibited
by exactly one collision.
A count of successfully transmitted frames for which transmission is inhibited by
more than one collision.
A count of frames for which the first transmission attempt on a particular interface
is delayed because the medium was busy.
The number of times that a collision is detected later than 512 bit-times into the
transmission of a packet.
A count of frames for which transmission on a particular interface fails due to
excessive collisions. This counter does not increase when the interface is
operating in full-duplex mode.
A count of frames received on a particular interface that exceeds the maximum
permitted frame size.
The number of received and transmitted symbol errors.
The number of received control unknown opcodes.
The number of received pause frames.
The number of transmitted pause frames.
Figure 4-3-6: RMON Counters Page Screenshot
108