Table of Contents
Advertisement
Click and Drag
Configuration
41
Access Files to Configure I/O
There are two ways to configure the SLC chassis for a 1746-INT4
module. You can either click and drag items from the list or you can
use the Read IO Config method.
Follow these steps to configure the SLC chassis by clicking and
dragging modules.
1. Double-click the menu item to open the IO Configuration menu
in the RSLogix 500 software.
2. Place the 1746-INT4 module into the correct slot by clicking and
dragging from the list.
Chapter
Publication 1746-UM614B-EN-P - September 2007
5
Advertisement
Table of Contents
