Table of Contents
Advertisement
Block Data Transfer
ENTER Key Data Transfer Summary
Most of the preceding information is summarized in table 9-4.
Table 9-4. ENTER Key Block Transfer Summary
LEGEND:
LF
=
Line Feed
CR
=
Carriage return
BT
=
Block terminator
NDT = Non-displaying terminator
FS
=
Field separator
EOL
=
End of line
EOF
=
End of field
EOW
=
End of workspace
Note: 1. Multiple entries in the ((Terminating Agent" column indicate the data block will be
terminated by whichever type of entry is encountered first.
2. An ((LF", enclosed in parenthesis, indicates a line feed will occur, if enabled.
3. The entry ((all ASCII chars" includes both displayable and control ASCII characters
(decimal codes 0-127).
TERMIN
ATING
DATA
END
MODE
CURSOR START
AGENT TRANSFERRED
CHAR CURSOR END
CHARACTER
Column 1, current BT
All ASCII chars
BT
Immediately
NON-FORMAT line.
NDT
and the following CR
following ter-
Ec sequences:
(LF)
minator.
• Video enhance-
ment
• Alt char set
• Field definition
If no data to be
transferred or cur-
sor is at end of
workspace when
transfer is in-
itiated only ((end
char" sent.
EOL
Same as above
CR
Column 1. LF, if
(LF)
enabled.
9-12
Advertisement
Table of Contents
