HP 262SA Reference Manual page 356

3276na Emulation Mode
Table F-9. 3276/8 Configuration Menu Fields
FIELD
Cursor Type
Cursor Blink
Alternate
Workspace Size
FUNCTION
This field determines the cursor's appearance.
Values
Line:
The cursor appears as an underscore.
Box:
The cursor appears as a full-bright rectangular box.
Default
=
Li ne
This field determines if the cursor blinks on and off.
Values
On:
The terminal alternately shows then inhibits the display of
the cursor making the cursor appear to blink on and off.
Off:
The cursor remains displayed at all times (doesn't appear to
blink).
Default
=
Yes
This field specifies an alternate workspace size. Both the host com-
puter and the terminal must agree on this value.
Values
24 X 80:
32 X
80:
43 X
80:
24 lines by 80 columns.
32 lines by 80 columns.
43 lines by 80 columns.
Ext Printer
Default
=
24 X 80
This field specifies whether Port 1 communicates to a host computer
or an external printer. When Port 1 is configured for an external
printer, it is impossible to access the HP function key labels that
select the terminal's major operating modes, the HP
~~ids"
keys, and
the User-defined function keys.
Values
Yes:
No:
Port 1 communicates to an external printer.
Port 1 communicates to a HP host computer.
Asterisk
F-22
Default
=
No
This field controls the appearance of the transmit indicators that the
terminal displays in the middle of the function key label line. The left
asterisk applies to Port 1 and the right asterisk applies to Port 2.
When the asterisk appears in the label line, it indicates that the
corresponding port is in its transmit state.