Table of Contents
Advertisement
Configuring the Terminal
Table 3-3. Terminal Configuration Menu Fields (Continued)
FIELD
BlkTermnator
Alternate Set
Transmit
3-14
FUNCTION
For data transfers between the terminal and a host computer,
the terminal (under certain circumstances) transmits the
specified block terminator character at the end of the transfer
operation. For details, see ffENTER Key Data Transfers" in
Section 9.
This character, when encountered in display memory, ter-
minates a data transfer Cfcopy" device control operations and
•
key transmissions).
Value: Any ASCII character.
Default: <RS> (Pt-to-pt)
<G 5>
(Multipoint)
This field specifies which logical character set
(@,
A, or
B)
is
currently enabled as the alternate character set.
(@
specifies
the base set, A is the Math set, and
B
is the Line-Drawing set.)
(B
is the default selection.) In response to an ASCII <SO> code
(control N) the terminal switches from the base set to the
enabled alternate character set; in response to an ASCII
<5 I> code (control 0) the terminal switches from the alter-
nate character set back to the base set.
Default=Li ne(B)
Specifies whether, in Format mode, to transmit all fields, or
only those which have been modified.
Values: All Fields.
Modified Fields.
Default=AIl Fields
Advertisement
Table of Contents
