Datacomm Configuration; Full Duplex Hardwired Configuration Menu; Full Duplex Modem Configuration Menu; Multipoint Asynchronous Menu - HP 262SA Reference Manual

Configuring the Terminal
Datacomm Configuration
To configure a datacomm port, display the appropriate menu, select the values, and save the
new values in nonvolatile memory, as described previously. Refer to Section 7 for further
information on data communications.
POINT-TO-POINT MENUS. The two point-to-point menus are shown in figures 3-3 and 3-4.
All fields contain the default values.
FULL DUPLEX HARDWIRED Port
1
BeudRete
II
Parity M • • •
DBtaBlh
L
Clock _ _
A5ter19k
I
Stop Bit5 EnqAck
--
TR(CD) Check Parity
III
SR(CH) •
RecvPace
-
SRRXmit II RR(CF)Recv II
XmitPace
.
-
SRRInvert
CS(CB)Xmit DM(CC)Xmit
III
Figure 3-3. Full Duplex Hardwired Configuration Menu
FULL DUPLEX MODEM
BaudRate
III
Parity
IIIGPII
DataBits
L
Asterlsk •• Stop Blts
TR(CD) Check Parlty _ _ SR(CH).
Port
1
EnqAck _ _
Clock _ _
RecvPace
XmitPace
-
- .
-
RR(CF)Recv _ _
DM(CC)Xmit _ _
Figure 3-4. Full Duplex Modem Configuration Menu
MULTIPOINT MENUS. The two multipoint menus are shown in figures 3-5 and 3-6 with the
default values displayed.
MULTIPOIHT ASYHC
BaudRate
II-
I I
Asterlsk
I
TR(CD)
Parl ty
IIIGP-
BCC •
Code • •
Stop Blts
SR(CH)
Port
1
Buf Size
Hum Bufs
p
Clock _ _
PGroupID
L
SGroupID .
XmitXpar •
Device ID
raJ
First Term
III
DM(CC)Xmlt
Ins SYHC
II
Figure 3-5. Multipoint Asynchronous Menu
MULTIPOINT SYNC
Port
1
BaudRate
11-
I I
A5terlsk
I
TR(CD)
PGroupID
L
SGroupID .
XmltXpar •
Par i ty
IIIPP-
BCC •
Device ID
=
C o d e "
SR(CH) _
First Term
III
Buf Slze
Hum Bufs
DM(CC)Xmlt
III
Figure 3-6. Multipoint Synchronous Menu
DATACOMM MENU FIELDS. Table 3-4 lists the fields of the datacomm menus, together
with their functions.
3-15