HP 262SA Reference Manual page 192

Block Data Transfer
Table 9-4. ENTER Key Block Transfer Summary (Continued)
TERMIN-
ATING
DATA END
MODE CURSOR START
AGENT TRANSFERRED CHAR CURSOR END
EOL Same as above CR
Same as above
(LF)
AutoTerm
NDT entered at NDT All ASCII chars
BT Same as above
(J)
=
YES current cursor po- and the following CR
sition. Then cur-
Ec sequences:
(LF)
sor moved to first
previous BT or
• Video enhance-
NDT. If none ment
found, cursor is
• Alt char set
homed (left mar-
• Field definition
gin ignored).
If no data to be
transferred or cur-
sor is at end of
workspace when
transfer is in-
itiated, only uend
char" sent.
EOL
Same as above CR Column 1. LF, if
(LF)
enabled.
If already an NDT
---
No data transmit- BT Cursor doesn't
at current cursor
ted, only uend CR
move.
position, cursor char".
(LF)
remains at cur-
rent position.
BLOCK LINE Current cursor BT
All ASCII chars.
BT Immediately
FORMAT position if in an NDT CR following the
unprotected field,
(LF)
terminator.
AutoTerm
else start of next
(J)
=
NO
unprotected or
transmit-only
field.
EOF Same as above CR First column
(LF)
following end of
field.
9-14