HP 262SA Reference Manual page 195

Block Data Transfer
Table 9-4. ENTER Key Block Transfer Summary (Continued)
TERMIN-
ATING DATA
END
MODE CURSOR START AGENT TRANSFERRED
CHAR CURSOR END
AutoTerm Current cursor BT Same as above
BT Same as above
(J)
=
NO position. NDT
Inh DC2
(H)
=
NO
EOW If no unprotected
or transmit-only
fields found, only
((end char" sent.
AutoTerm Cursor currently NDT
Same as above BT Same as above
(J)
=
YES
in an unprotected
field: an NDT en-
tered at current
cursor position.
Then, cursor
moved to first pre-
vious BT or NDT.
If none, then cur-
sor homed.
EOW
Same as above
Cursor currently
--- Bell sounds. No BT
Cursor doesn't
in a protected
data transmitted. move.
field.
If already an NDT
--- No data transmit- BT
Cursor doesn't
at current cursor
ted, only uend CR move.
position.
char".
(LF)
MODIFY
Logical start-of- BT All chars, in- BT Immediately
MODES
text position, if NDT eluding:
CR following ter-
one is defined.
• Control codes
(LF)
minator.
Else to ((Start Col"
• Video enhance-
as specified in Ter-
ment Ec se-
minal Configura-
quences
tion menu. • Alt char set Ec
sequences
• Field definition
Ec sequences
EOL
Same as above CR
Column at
(LF) which trans-
mission began.
LF, if enabled.
9-17