Table of Contents
Advertisement
Configuring the Terminal
Table 3-3. Terminal Configuration Menu Fields (Continued)
FIELD
FUNCTION
When the feature is disabled and the terminal is in Remote
mode, an ASCII CCtab" character (decimal 9) is sent to the
computer. In Local mode, the cursor is moved to the next tab
stop.
Yes: Tab=Spaces enabled
No:
Tab=Spaces disabled
Default =
No
RETURN def
This field specifies the definition of the
1:1
key. The default
definition is an ASCII <CR>. The definition may consist of up
to two characters. If the second character is a space, it is
ignored. (If a control character is to be entered, it will be
necessary to use the
OJ
SPLAY FUNCTNS key.)
Default= <CR>
RETURN=EHTER
This field specifies whether or not you want the
1:1
key to
function as though it were the. key. The value CCYes" causes
both keys to function in the manner currently defined for the
•
key when the workspace is in Remote mode.
Yes: RETURN equals ENTER
Ho:
RETURN not equal to ENTER
Default =
No
Printer Code
4
This field specifies which printer (an external printer or the
integral printer) will respond to device code CC4" when the
terminal receives a device control escape sequence from the
host computer.
Device code cC4" is ordinarily used only for selecting an exter-
nal printer. Through the use of this configuration parameter,
however, you can redirect the device control operations to the
integral printer without altering the host computer program.
Ext: external printer
Int: integral printer
Default=Ext
3-7
Advertisement
Table of Contents
