Point-To-Point Considerations - HP 262SA Reference Manual

Data Communications
POINT-TO-POINT CONSIDERATIONS
The terminal point-to-point datacomm capabilities are listed in table 7-1.
Table 7-1. Terminal Point-to Point Datacomm Capabilities
TERMINAL
HP 2625A
Standard
Terminal
HP 2628A
Standard
Terminal
HP 2625A
and
HP 2628A
Option
021
HP 2625A
and
HP 2628A
Option
022
HP 2625A
Option
026
HP 2628A
Option
046
DATACOMM FEATURES
Port 1 can be used for either an RS-232-C or RS-422 datacomm connection.
Port 2 is an IBM Bisync port.
Port 1 can be used for either an RS-232-C or RS-422 datacomm connection.
Port 2 is a printer connection port, useable as either RS-232-C or RS-422
type.
Port 1, on both the HP 2625A and 2628A terminals, connects to a DSN data
link through a cable which is included in this option.
Contains an integral datacomm pod adapter for connecting to either a
13265A modem or a 13266A Current Loop Converter.
Port 1, on this terminal, consists oftwo ports: one is a standard RS-232-C/RS-
422 port; the second is an Alternate Peripheral Interface port, for connecting
peripheral devices, such as printers and plotters. This option is included only
on graphics terminals. (See figure 7-1.)
Port 2, on this terminal, consists of two ports: one is a standard RS-232-C/RS-
422 port; the second is an Alternate Peripheral Interface port, for connecting
peripheral devices, such as printers and plotters. This option is included only
on graphics terminals. (See figure 7-1.)
<- ( .
Alternate Peripheral
Interface Connector
RS-232-C/RS-422
Connector
Figure 7-1. Dual Connector (Options 026 and 046)
7-4