HP 262SA Reference Manual page 191

Block Data Transfer
Table 9-4. ENTER Key Block Transfer Summary (Continued)
TERMIN-
ATING DATA END
MODE CURSOR START AGENT TRANSFERRED CHAR CURSOR END
CHARACTER Current cursor EOF All ASCII chars. If CR First column af-
FORMAT position, if in an
cursor is at end of (LF)
ter the end of
unprotected field,
workspace when the field sent.
else start of next transfer is in-
unprotected field.
itiated, only ttend
char" sent.
BT Same as above BT Immediately
NDT CR following ter-
(LF)
minator.
BLOCK LINE Column 1, current BT All ASCII chars BT Immediately
NON-FORMAT line. NDT and the following CR following ter-
Ec sequences:
(LF)
minator.
AutoTerm
(J)
=
NO
• Video enhance-
Inh DC2
ment
(H)
=
YES
• Alt char set
• Field definition
If no data to be
transferred or cur-
sor is at end of
workspace when
transfer is in-
itiated, only ((end
char" sent.
EOL Same as above CR Same as above
(LF)
AutoTerm
Current cursor BT All ASCII chars
BT Same as above
(J)
=
NO position. NDT
and the following CR
Inh DC2 Ec sequences:
(LF)
(H)
=
1'10
• Video enhance-
ment
• Alt char set
• Field definition
If no data to be
transferred or cur-
sor is at end of
workspace when
transfer is in-
itiated, only ((end
char" sent.
9-13