Table of Contents
Advertisement
Configuring the Terminal
Table 3-4. Datacomm Configuration Menu Fields
BaudRate
This field specifies at what speed you want the data transmis-
sion to take place (in bits per second).
Values:
110
150
300
600
1200
2400
4800
1
9600
19.2K
Parity/DataBits
(Point-to-point
only)
Parity
(Multipoint
only)
3-16
These fields specify the type of parity generation and number
of data bits to be used for each character.
NONE
18:
(no parity bit)
o'
5 17:
(parity bit always zero) (default)
ODD/7:
(odd parity)
1'5/7:
(parity bit always one)
EVEN/7:
(even parity)
Default
=
0' 5
I
7
(Full duplex hardwired)
ODD 17
(Full duplex modem)
This field specifies what type of parity generation and check-
ing you wish used with each data character. Pa,.rity is referred
to as a Vertical Redundancy Check (or VRC, for short).
Parity is only used with 7-bit data codes. If the terminal is
configured for 8-bit code
(Code=ASCI 18),
this field should be
set to None.
Values:
l '
5
(parity bit always one)
0'
5
(parity bit always zero)
ODD
(odd parity)
EVEN
(even parity)
None
Default
=
Odd
Advertisement
Table of Contents
