HP 262SA Reference Manual page 377

3276/78 Emulation Mode
The NEXT SYSTEM function key switches the terminal to its HP personality. The other func-
tion keys perform the same operations as indicated in table F-I0.
To select the integral printer, you must press __ before initiating any print operation.
By simultaneosuly pressing the ALT key and the DEV CNCL key, you may stop a print
operation that is in progress. Or you may simultaneously press the ALl; _ , and _ keys
to cancel the print operation and clear the printer buffer.
STATUS LINE AND ERROR MESSAGES
The bottom line of the display monitor in a 3276 Control Unit or a 3278 Display Station is an
((Operator's Information Area". On this line, the system displays icons and messages to notify
the user of the station's current operating state.
The bottom line of the HP 2625A is a Status Line that provides similar information, except
written text replaces the various IBM symbols. Table
F-ll
lists the various messages that
may appear within the Status Line. See Section 10 of the Reference Manual for a list of those
error messages that replace the function key labels.
Table F-ll. IBM Status Messages
MESSAGE MEANING
2
The IBM personality of your terminal is ready or working.
CAPS The terminal only prints uppercase letters unless the_
key is held down to print the corresponding lowercase letter.
All remaining keys are unaffected.
Ins Char
The terminal is in Insert Character mode.
X Go Elsewhere
Press the _ key to unlock the keyboard. Then move the
cursor to another location on the screen or take another
action.
X Numeric Only
Press the _ key to unlock the keyboard. Then enter only
((numeric" data into this field.
X Printer Busy The printer connected to your terminal is currently busy.
X Prog nn
(Where ((nn" is a 2-digit number.) The terminal has detected a
programming error in the data it received from the host.
Press the _ key to unlock the keyboard. If the problem
persists, refer to your
3276
Problem Determination Guide for
further information.
F-43