Recommended Materials And Equipment; Operating Guidelines; Service Considerations - HP Engage Go Convertible System Maintenance & Service Manual

Recommended materials and equipment

Materials and equipment that are recommended for use in preventing static electricity include:
● Antistatic tape
● Antistatic smocks, aprons, or sleeve protectors
Conductive bins and other assembly or soldering aids
●
● Conductive foam
● Conductive tabletop workstations with ground cord of one-megohm +/- 10% resistance
● Static-dissipative table or floor mats with hard tie to ground
Field service kits
●
● Static awareness labels
● Wrist straps and footwear straps providing one-megohm +/- 10% resistance
● Material handling packages
● Conductive plastic bags
● Conductive plastic tubes
● Conductive tote boxes
Opaque shielding bags
●
● Transparent metallized shielding bags
● Transparent shielding tubes

Operating guidelines

To prevent overheating and to help prolong the life of the computer:
Keep the computer away from excessive moisture, direct sunlight, and extremes of heat and cold.
●
● Operate the computer on a sturdy, level surface. Leave a 10.2-cm (4-inch) clearance on all vented sides
of the computer and above the display to permit the required airflow.
● Never restrict the airflow into the computer by blocking any vents or air intakes. Do not place the
keyboard, with the keyboard feet down, directly against the front of the desktop unit as this also
restricts airflow.
Occasionally clean the air vents on all vented sides of the computer. Lint, dust, and other foreign matter
●
can block the vents and limit the airflow. Be sure to unplug the computer before cleaning the air vents.
● Never operate the computer with the covers removed.
● Keep liquids away from the computer and keyboard.
● Install or enable power management functions of the operating system or other software, including
sleep states.

Service considerations

Listed below are some of the considerations that you should keep in mind during the disassembly and
assembly of the computer.
18 Chapter 4 Routine care, SATA drive guidelines, and disassembly preparation