SHOWTEC NET-4/3 IP V1 User Manual page 8

NET-4/3 IP, 3-pin
DANGER
Electric shock caused by short-circuit
This device falls under IEC protection Class I.
● Make sure that the device is electrically connected to ground (earth). Connect the device only to a
socket-outlet with ground (earth) connection.
● Do not cover the ground (earth) connection.
● Do not bypass the thermostatic switch or fuses.
● For replacement use fuses of the same type and rating only.
● Do not let the power cable come into contact with other cables. Handle the power cable and all
connections with the mains with caution.
● Do not modify, bend, mechanically strain, put pressure on, pull or heat up the power cable.
● Make sure that the power cable is not crimped or damaged. Examine the power cable periodically
for any defects.
● Do not immerse the device in water or other liquids. Do not install the device in a location where
flooding may occur.
● Do not use the device during thunderstorms. Disconnect the device from the electrical power supply
immediately.
● Keep the connectors sealed with the rubber caps when the connectors are not in use.
● Do not connect the cables from above the connectors, if the device is installed outdoors. Make a
'drip loop' in the cable so that rain water cannot enter the device.
Attention
Power supply
● Before connecting the device to the power supply, make sure that the current, voltage and
frequency match the input voltage, current and frequency specified on the information label on the
device.
● Make sure that the cross-sectional area of the extension cords and power cables is sufficient for the
required power consumption of the device.
Attention
For professional use only
This device shall be used only for the purposes it is designed for.
This device is designed to be used as a signal converter. Any incorrect use may lead to hazardous
situations and result in injuries and material damage.
● This device is not suitable for households.
● This device is not designed for permanent operation.
● This device does not contain user-serviceable parts. Unauthorized modifications to the device will
render the warranty void. Such modifications may result in injuries and material damage.
Product code: 50817
7