Introduction; Before Using The Product; Intended Use; Product Lifespan - SHOWTEC NET-4/3 IP V1 User Manual

NET-4/3 IP, 3-pin
1.

Introduction

Before Using the Product

Important
Read and follow the instructions in this user manual before installing, operating or
servicing this product.
The manufacturer will not accept liability for any resulting damages caused by the non-observance of
this manual.
After unpacking, check the contents of the box. If any parts are missing or damaged, contact your
Highlite International dealer.
Your shipment includes:
● Showtec NET-4/3 IP
● Schuko to power pro cable (1,5 m)
● Mounting bracket (attached)
● 2 x hook-and-loop strap
● User manual

Intended Use

This device is intended for use as a signal converter. It is suitable for use indoors and outdoors. It is not
suitable for households.
Any other use, not mentioned under intended use, is regarded as non-intended and incorrect use.

Product Lifespan

This device is not designed for permanent operation. Disconnect the device from the electrical power
supply when the device is not in use. This will reduce wear and improve the device's lifespan.

Text Conventions

Throughout the user manual the following text conventions are used:
● Buttons:
● References:
● 0–255:
● Notes:
Product code: 50817
All buttons are in bold lettering, for example "Press the UP/DOWN buttons"
References to chapters and parts of the device are in bold lettering, for example:
"Refer to 2. Safety", "into the DMX signal connector (08)"
Defines a range of values
Note: (in bold lettering) is followed by useful information or tips
4
Fig. 01