Changing The Password; Updating The Firmware - SHOWTEC NET-4/3 IP V1 User Manual

NET-4/3 IP, 3-pin

Changing the Password

To change the password, follow the steps below:
Log in with your current password.
Enter the new password in the New Password field.
Click Apply to save the changes.

Updating the Firmware

You can update the firmware of the NET-4/3 IP via the web interface. If an update is available for this
device, you can download it from the product's page on www.highlite.com.
Scroll to the Downloads section and click on Product files and software.
Select the file and download it.
Click Open on the dialog box to confirm the selection.
Click Upload File to start the firmware update process.
Follow the instructions on the browser to complete the update.
Note:
It can take up to 20 seconds to update the firmware. Do not click any buttons before the update is
complete.
After completion of the firmware update, reset the NET-4/3 IP to the default factory settings. See
6.8.6. Set Default on page 27.
Note:
When you update the firmware, all previously configured settings will be lost.
Product code: 50817
30