Set Display; Set Default; Firmware Version - SHOWTEC NET-4/3 IP V1 User Manual

NET-4/3 IP, 3-pin

Set Display

In this menu, you can adjust the settings of the OLED display.
Press the UP/DOWN buttons to select one of the following 2 options:
● Mode:
Note:
If the display is rotated by 180°, the function of the buttons on the control panel will also be reversed. The
MENU button will function as the ENTER button and vice versa. The UP button will function as the DOWN
button and vice versa.
● Backlight(s):
Press the ENTER button to confirm the selection.

Set Default

In this menu, you can reset the settings of the device to the default factory settings.
Press the UP/DOWN buttons to select Yes or No.
Press the ENTER button to confirm the selection.

Firmware Version

In this menu, you can view the firmware version of the device.
Product code: 50817
Set the orientation of the OLED display. The available options are Normal or
Inverse. If Inverse is selected the OLED display will be rotated by 180°.
Set the backlight of the OLED display. The available options are On, 10 and 30.
Depending on the setting, the display will stay on or turn off after 10 or 30
seconds.
27