Summary of Contents for SHOWTEC Compact Par 108/10 Value Line
Page 1
Compact Par 108/10 Value Line ORDERCODE 42594...
Page 2
For more information: iwant@showtec.info You can get some of the best quality, best priced products on the market from Showtec. So next time, turn to Showtec for more great lighting equipment. Always get the best -- with Showtec ! Thank you!
Save the carton and all packing materials. In the event that a fixture must be returned to the factory, it is important that the fixture be returned in the original factory box and packing. Your shipment includes: • Compact Par 108/10 Value Line with IEC powercable 1,5m • User manual LED Expected Lifespan LEDs gradually decline in brightness over time.
Page 5
If your Showtec device fails to work properly, discontinue use immediately. Pack the unit securely (preferably in the original packing material), and return it to your Showtec dealer for service.
Below), using the support brackets. Mounting the Compact Par 108/10 Value Line with a clamp or any other mounting bracket is recommended, depending on the requirements of your application. The Compact Par 108/10 Value Line can be placed on a flat stage floor or mounted to any kind of truss by a clamp.
Connection with the mains Connect the device to the mains with the power-plug. Always pay attention, that the right color cable is connected to the right place. International EU Cable UK Cable US Cable BROWN YELLOW/COPPER FASE BLUE BLACK SILVER YELLOW/GREEN GREEN GREEN...
Description of the device Features The Showtec Compact Par 108/10 Value Line is a light effect with high output and great effects. • Great product for every DJ or in venues with limited space • Very lightweight • Compact flat Par Housing •...
5) LCD Display + Menu Buttons Earth connection Installation Remove all packing materials from the Compact Par 108/10 Value Line. Check that all foam and plastic padding is removed. Connect all cables. Always disconnect from electric mains power supply before cleaning or servicing.
Multiple Compact Pars (Master/Slave control) 1. Fasten the effect light onto firm trussing. Leave at least 0,5 meter on all sides for air circulation. Use a 3-p XLR cable to connect the Compact Par 108/10 Value Line. The pins: Earth...
Multiple Compact Pars (DMX Control) 1. Fasten the effect light onto firm trussing. Leave at least 0,5 meter on all sides for air circulation. Plug the end of the electric mains power cord into a proper electric power supply socket. Use a 3-p XLR cable to connect the Compact Pars.
Control Panel Fig. 5 A. LED Display D. Up Button B. MODE Button E. Down Button C. SETUP Button DMX Control Mode The fixtures are individually addressed on a data-link and connected to the controller. The fixtures respond to the DMX signal from the controller. DMX Addressing The control panel on the front side of the base allows you to assign the DMX fixture address, which is the first channel from which the Compact Par will respond to the controller.
3. DMX address 4. Slave 5. Sound controlled The Compact Par 108/10 Value Line will only show its version number at start-up ! 1. Built-in Programs 1) Press the MODE button on the device, until the display shows 2) With this menu you can set the Built-in Program Mode of the Compact Par.
4) When you select , you can press Setup to switch between the built-in programs Menu. 5) You can choose 2 different sub menus. Program Running Speed from 01-99 and FL Flash Frequency from 00-99 Use the Setup button to scroll through the menu. 2.
DMX Channels 1 Channel Channel 1 – Color Macro’s No Function 1-22 23-45 Green 46-68 Blue 69-91 Cyan 92-114 Yellow 115-137 Orange 138-160 Pink 161-183 Purple 184-206 Dark Blue 207-229 Light Green 230-252 White 253-255 Cool White 3 Channels Channel 1 – Red 0-255 Red gradual color brightness from 0 to 100% Channel 2 –...
6 Channels Channel 1 – Master Dimmer 0-255 Brightness from 0 to 100% Channel 2 – Red (when CH6 is OFF 0-255 Red gradual color brightness from 0 to 100% Channel 2 – RGB Macro (when CH6 is set between 1-24 Red (255) 9-17 Red (255), Green (50)
250-255 Sound-controlled Maintenance The Showtec Compact Par requires almost no maintenance. However, you should keep the unit clean. Otherwise, the fixture’s light-output will be significantly reduced. Disconnect the mains power supply, and then wipe the cover with a damp cloth. Do not immerse in liquid. Wipe lens clean with glass cleaner and a soft cloth.
5. If you are unable to determine the cause of the problem, do not open the Compact Par, as this may damage the unit and the warranty will become void. 6. Return the device to your Showtec dealer. No Response to DMX Response: Suspect the DMX cable or connectors, a controller malfunction, a light effect DMX card malfunction.
Page 20
Problem Probable cause(s) Remedy No power to the fixture • Check that power is switched on One or more and cables are plugged in. fixtures are Primary fuse blown. • Replace fuse. completely dead. Fixtures reset The controller is not connected. •...
Product Specification Model: Showtec Compact Par Great product for every DJ or in venues with limited space Very lightweight Compact flat Par Housing Stylish design Power Supply: 100-240V AC Easy Link Up to 15 units Convection cooling, 100% silent Flicker Free (Suitable for TV Studio) Peak Power 75 Watt;...
Need help?
Do you have a question about the Compact Par 108/10 Value Line and is the answer not in the manual?
Questions and answers