Build The Nose Gear Formers - BVM KingCat V2 COMPOSITE Assembly And Operating Manual

BUILD THE NOSE GEAR FORMERS

Using the parts pictured, you will need to build
the Nose Gear formers.
(Note; the three Nose Cone formers have been
factory installed.)
Glue together each of the parts that
make up the Nose Gear Formers.
There are two sets of the straight
pieces
Glue the parts together making sure
that the parts are square and snug to
each other.
Next glue together the two sets of tray
mount brackets.
BVM ® 2023
KingCat-V2
Assembly & Operation Manual
6 12/2023