Siemens SCALANCE XCM-100 Equipment Manual page 38

Installation and disassembly
5.5 Installing on an S7-1500 mounting rail
Removal
Figure 5-6
To remove a SCALANCE XCM-100 from an S7-1500 mounting rail, follow the steps below:
1. Lever the spring-loaded securing bar down using a screwdriver as far as it will go.
2. Release the device from the lower edge of the S7-1500 mounting rail with the securing bar
pulled down.
38
Removing a SCALANCE XCM-100 on an S7-1500 mounting rail
SCALANCE XCM-100 Media Converter
Equipment Manual, 12/2023, C79000-G8976-C659-03