Adjustment For Throttle Grip; Adjust The Clutch Lever - VOGE DS525X 2019 Operation Manual

Adjustment for throttle grip

·
The throttle grip is for controlling the engine rotation.
·Turn to driver direction is acceleration, the opposite
direction is deceleration.
·Adjust the gap of throttle cable.
–Remove the rubber jacket 1.
–Loosen the locking nut 2.
–Turn the adjustor 3, which adjust the gap of throttle cable
within 2-4mm.
–Lock up the nut 2.
–Re-assemble the rubber jacket 1.

Adjust the clutch lever

·Firmly grasp the clutch lever when starting engine, braking
or gearshift to let the clutch plates separate for cutting off
the engine power.
·The free travel at the end of clutch lever shall be within
5-8mm, in case it is incorrect, adjust as below.
–Remove the rubber jacket
–Loosen the locking nut 1
–Turn the adjustor 2 for ensuring the free travel
within 5-8mm.
–Lock up the nut 1.
–Re-assemble the rubber jacket.
·When the throttle cable adjusted, make sure the throttle grip return automatically without idling rise.
·When the throttle cable adjusted, turn the handle bar to its left and right limit respectively without idling rise.
40
The free clearance at the end of clutch lever : 5-8mm.
Too large the free travel of clutch lever may lead to
abrasion or malfunction of clutch set and gear box.
!
Caution
1 3 2
The free clearance of throttle cable: 2-4mm.
2
!
Warning
1